HPE FlexNetwork 5140 24G 4SFP+ HI Switch (R9L61A) |
I/O ports and slots | 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) with 8 combo ports (RJ45 or SFP) |
4 1/10G SFP+ ports, 1 port expansion module slot. |
Attention: SFP PLUS can also support 1G SFP and 1G SFP-GE-T (only works at GE) |
Additional ports and slots | 1 dual-personality (RJ-45 or mini-USB) serial console port 1 RJ-45 out-of-band management port 1 USB 2.0 |
Power supplies | 2 power supply slots 1 minimum power supply required |
Fan tray | Airflow direction is from side to back |
Physical characteristics | Dimensions | 17.32(w) x 14.17(d) x 1.71(h) in. (44.00 x 36.00 x 4.36 cm) (1U height) |
Weight | ≤6.7 kg |
Memory and processor | 2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash |
Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) |
Performance | 1000 Mb Latency | < 5 µs |
10 Gbps Latency | < 3 µs |
Throughput | 180 Mpps |
Routing/Switching capacity | 288 Gbps |
Routing table size | 8K |
MAC address table size | 32K |
Environment | Operating temperature | 23°F to 113°F (-5°C to 45°C) |
Operating relative humidity | 5% to 95%, noncondensing |
Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) |
Non-operating/Storage relative humidity | 5% to 95%, noncondensing |
Acoustic | low speed fan: 53.0 dB, High speed fan: 68.9 dB. ISO 7779 |
Electrical characteristics | Frequency | 50/60 Hz |
Maximum heat dissipation | ranges from 81.89 BTU/hr to 324 BTU/hr depending on power supply configuration |
Current | 6A |
Voltage | 100-240 VAC, rated (90-264 VAC, max)-48 to -60 VDC, rated (-36 to -72 VDC, max) (depending on power supply chosen) |
Maximum power rating | 95 W (dual DC) |
Idle power | 29 W (dual AC) |
Notes: | - Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated |